Author: Admin

An intra-oral camera is a tiny device approximately the same size as a large pen or toothbrush, with a camera lens at the end. It is covered with a protective plastic sheath that is changed for every patient to ensure the device is entirely hygienic and to prevent any risk of contamination. The video camera is small enough to fit comfortably in your mouth so that we can take pictures of your teeth. Unlike digital dental x-ray images, the images produced by an intra-oral camera are easy to understand and are incredibly clear.

An intraoral camera with screen is an extremely safe piece of equipment. It is specially designed only to be used inside your mouth, and the images are captured comfortably and quickly. In fact, it’s a far more comfortable piece of equipment than a dental mirror which can sometimes trigger a gag reflex. With this tiny camera, we don’t need to poke or probe unnecessarily, as it will scan the inside of your mouth, without making you feel as if you want to gag!

By viewing magnified images inside your mouth, we can make a quicker and more accurate diagnosis. A faster diagnosis is essential if you experience any pain or discomfort in a tooth, and where you need immediate treatment. Additionally, an intra-oral camera is comfortable and non-invasive, which is very important when you are in any pain.

Anyone who feels a little nervous about having dental treatment may find they are more comfortable with this treatment approach. Often just knowing more about what is happening and understanding your dental health can help relieve fear and anxiety.

If you want to get more information about dental equipment, please click here “china dental equipment”.

Related article：What are the tips for choosing mobile dental equipment?

Debris

Blow out the handpiece using compressed air to remove loose debris, cleaner, and lubricant before sterilization (a handpiece should never be run without a bur!).

Air Pressure

Excessive air pressure (exceeding 40 PSI) could cause damage to turbine bearings, reducing the performance of the turbine.

When dental handpiece performance is reduced at 35 PSI dental turbine unit should be rebuilt or replaced.

Sterilization

Never exceed 275ºF (135ºC) during the sterilization cycle; use the lowest temperature possible while still achieving proper sterilization of instruments.

Air and Water Supplies

Must remain free of debris.

Filters should be used and checked often.

Compressor oils and carbons must be filtered from the air supply.

Push Button Spindle Maintenance

Push button spindles are made of metal components and require small amounts of lubricant and periodic flushing for an extended life span.

Lube Free or Maintenance Free Turbines (Beware)

Only the bearings are maintenance free!

The bearings are pre-greased at the factory and shielded to help protect them from debris and the removal of lubricants during use.

Other turbine components still need to be maintained; O-rings will dry out without lubricants and push button spindles require lubrication and flushing.

1.Choose the correct magnification and working distance in order to ensure that you work in complete ergonomic harmony with your dental binocular loupes.

2.Look at an object with straight black lines.
The most common signs of poor quality loupes are low resolution, chromatic aberration and spherical aberration. Resolution is defined as an optical system’s ability to form distinguishable images of objects separated by small distances, or to recognize fine detail.

3.Test the magnification.
Choose the lowest comfortable magnification level, as this would provide the widest field of view.

4.Test the working distance.
The working distance refers to the distance between your eyes, and the patient’s mouth. You can measure this while assuming your normal working position, making sure you are comfortable, that your back is straight, and that you are not leaning forward too much.

5.Check the field of view.
A larger field of view is preferred, as there is a larger area visible through the dental surgical loupes, and there is less need to move your head around .

6.Check the depth of field.
A larger depth of field is preferred, as there is a deeper area visible through the loupes. The size of the “depth of field” corresponds directly to the “working distance”.

7.Compare with prescription lenses.
If you use glasses with prescription lenses, it is important that you have the option of fitting your loupes frames with the correct prescription. Otherwise, the loupes will not perform according to specifications.

8.Test the weight of the loupes.
Weight is an important factor when choosing a new loupe. Especially if the loupe is to be used for longer periods of time.

Wall-mounted dental light, as the name suggests, is the dental surgical light mounted on the wall.

You can choose this wall-mounted dental light when the top of the room does not meet the installation requirements and you do not want to use the landing options. When not in use, the light can be placed against the wall, saving much space for you.

Each wall-mounted Dental Light has its own Characteristics, such as this KWS KD-2036D-1 108W Wall-mounted Shadowless Lamp Surgical Medical Exam Light, which features:

1. International brand LED bulbs; High brightness, no temperature rise
2. Brightness adjustable, spot light adjustable;
3. Long wingspan, it can rotate 180°. A wide range of lighting, wall-placement to save space.

This light applies for Medical: Surgery Clinic; Dental; Cosmetic surgery; Operating room; Pet healthcare, ect.

And for this Wall Mounted Dental Medical Operatory Lamp Single Demo Head Surgery Light for Illuminate WYZ700, it features:

Full-close streamline lamp body design completely meets the demand of the sterilization and high standard of laminar flow purification in the modern operation rooms
CAD/CAM designed squamous reflector system; even illumination effectively eliminating shadows under varies circumstances; color temperature approach of sunlight; depth of light beams reaching over 800mm
Micro computer digital control system offers illuminance memory function
Adopt 8-stage continuous light adjustment
One lamp holder with two bulls enables automatic operation of the standby bulb in 1/5 second when the main bulb malfunctioned. Handle and panel have indicators for the damage of main or standby bulb
The handle on the central of lamp can be detachable, can take high temperature (≤ 134° C) sterilization treatment
Special heat-isolated radiation filter reduces heat to the minimum level
6D Balanced system has more than 3 joints, can be rotated in 360°, possess fatigue correcting unit and fix position hand handle device, easy to fix position timing after long time use
Average service life of halogen bulbs up to 1000 hours

Therefore, you can choose the most suitable wall-mounted dental light according to your own needs. A lot of cheap China dental surgical lights for sale on dentalsalemall.com now with the top quality and affordable price, as well as free fast delivery to worldwide!

Source:
https://sarahliang2019.blogspot.com/2019/06/characteristics-of-wall-mounted-dental.html

As we know, there are two types of Marathon Micro Motor: Brushed vs Brushless Motors. What’s the difference? Let’s have a look.

In a conventional electric motor, a rotor (a rotating portion of the machine) is driven in a stator (fixed portion). Both are connected by an electrical connection: a current collector or a commutator that is in contact with a small carbon brush.

Using brushless technology, the rotor consists of a magnet and a coil stator that alternately positively or negatively. Therefore, the magnetic pole attracts and repels, allowing the motor to rotate. The advantage is that there is no physical contact between the rotor and the stator. Energy is transferred from one to the other by the magnetic force between the electromagnets.

Powered by direct current, the motor operates with alternating current generated by an electronic card that converts the direct current into a three-phase variable frequency. Thus, the coils are alternately fed to create a rotating field and thus produce a rotation. An electronic module built into the motor or housing continuously regulates the current so that the motor runs at peak efficiency. This improves overall performance and provides real value for money.

In short, brushless motors are better than brushed units. Users can take advantage of reduced maintenance, increased efficiency, and reduced heat and noise. A brushless motor is a synchronizing unit having one or more permanent magnets. Power tools with brushless motors are now considered high-end products.

You can find a lot of brushless dental micro motor available on dentistsalemall.com, all of which are manufactured with high precision, high coaxial output, state of the art brushless DC motor technology, digital intelligent control, brushless maintenance free, non-commutated sparks, More power, more torque, higher speed, longer life and quieter. Intelligent closed-loop control, speed closed-loop control. Touch the keyboard for more comfortable and convenient operation. Ergonomically designed, comfortable to handle, compact in appearance and better in texture.

Dental scaling is routinely performed with dental scaler to assist patients with gum disease and excessive plaque buildup. While the standard cleaning will resolve the tooth surface, the scaling is much deeper. If your dentist recommends dental scaling and root planning for your teeth, then understanding what it means is helpful so you can prepare for what’s ahead.

For patients with gum disease, scaling is a common dental procedure. This is a type of dental cleaning that can reach below the gum line to eliminate plaque buildup. The process of scaling teeth and root planning is often referred to as deep cleaning. This treatment goes beyond the general cleaning that you receive with your regular checkup and annual visit.

Everyone experiences some form of plaque buildup. The saliva in the mouth, bacteria and proteins form a thin layer that covers the teeth at almost any time. When you eat, tiny particles, sour and sugar in the food stick to the film, creating accumulations on the teeth called plaque. Bacteria living in this plaque can cause gum disease and tooth decay. Brushing your teeth, flossing and regularly cleaning your teeth can help remove plaque and prevent more serious problems.

If your gums are healthy, the tissue will fit tightly to the teeth and keep the plaque out. However, if gum disease begins to form, this tissue will loosen. Healthy gums are attached to the teeth only 1 to 3 millimeters below the gum line. With gum disease, you will begin to develop deeper pockets. These can fill the plaque, worsening your problems and causing symptoms such as bad breath.

If you have 4mm or more pockets, your dentist may recommend dental scaling to remove the plaque under the gums and help treat the gum disease.

During the procedure, dentist would like to use professional tools, such as the ultrasonic scaler, even the Scaler with Water Bottle, which is now widely used in dentistry. And among all the dental scalers, the woodpecker dental ultrasonic scaler is the most popular for dentist.

Dental loupes are the magnifying glasses worn by dentists to expand everything they see in the mouth. There are two basic reasons for wearing these glasses. First, the vision is improved because everything in the field of vision is much larger. Second, wear dental loupes to give the dentist a more “physiological” posture at work, thereby minimizing the slouching which dentists are historically known to develop.

Dental loupes can reduce occupational pain

Dental professionals are prone to occupational musculoskeletal pains and injuries because of poor working posture, prolonged repetitive motion, excessive exposure to vibration, and especially when performing tooth extraction operations. All dentists and dental hygienists experience at least one musculoskeletal pain throughout their career, such as back pain, lower back pain, neck fatigue and shoulder pressure. Some people even experience severe chronic pain, leading to injuries and early retirement.

Usually when working with the naked eye, you need to bend forward and close to the patient’s mouth to better observe the oral cavity. Keeping this position for a long time may cause musculoskeletal pains or more serious injuries. Over time, some dentists may even form a “dental hunch back” posture

Dental binocular loupes improve your dental and surgical work. Pick up a pair of loupes, attach a headlight, you’ll see the difference within few minutes. Therefore, please choose a suitable pair of dental loupes if you are a dentist!

As a dentist, dental hygienist or support staff at a dental clinic, you know that having a reliable and effective dental autoclave sterilizer is critical to the smooth operation of the clinic. We offer a range of autoclaves/sterilizers for general purpose sterilization applications. Customers can choose a range based on application, quantity and budget requirements. Effectively disinfects a variety of solid, hollow or porous (wrapped/unwrapped) materials and meets the requirements of today’s demanding clinical environments.

All high-quality, scalable benchtop dental flow autoclaves are designed to meet customer specifications. Our dental autoclaves are manufactured using state-of-the-art technology and are manufactured by our experts using quality materials. Customers can use the product at the best price on the market and can use it for a long time. Our dental dental autoclave vacuum steam is tested based on set parameters to ensure it meets established industry standards and specifications. We do not compromise on product quality, and our experts will check the quality assurance of each finished unit. High performance, reliable results and a long service life make it an ideal choice.

Such as the SUN series dental autoclave, it has been focusing on the development, production and export of medical instrument, and has established the ISO-13485-2003 Quality Management system and had the CE certified by Itc.

Sun adhere the idea of “start with the requirement of customer, End with the satisfaction of customer”. Sun dental autoclave and other medical instrument have gotten a good reputation in the world for their perfect appearance, high technology and competitive price.

An intraoral camera (IOC) is a camera used by a dentist or doctor to show the inside of the mouth to a patient as an alternative to using a mirror. They were first introduced in 1989 and are now widely used in dental clinics. In particular, an intraoral camera with screen allows patients to see clear images of their mouths and help dentists negotiate various treatment options with them. And the image can be saved to the patient’s file for future reference.

The intraoral camera is an excellent dental device that enhances patient awareness and increases patient acceptance. Our high-quality oral endoscopes provide clear image clarity, comfortable operation and bright LEDs around the lens. The images are easy to share and the system is integrated with a range of imaging and practice management software applications. They can be easily connected to a computer wirelessly or via a USB or docking station. Most intraoral cameras use LEDs for image capture without external illumination.

Let’s take the 2018 New Intraoral Oral Dental Camera USB-X PRO IMAGING SYSTEM MD740 as an example to introduce the characteristics of the intraoral camera.

This MD740 intraoral camera features:

1)Power supply: None needed, powered through USB cable (USB connection), can be connected directly to PC or Laptop. The images can be saved via software which included in the package. Easy set up and quick connect to the computer through the USB 2.0. this machine need to connect with USB interface behind the host computer motherboard based USB 2.0, please DO NOT use front-end USB interface. because most of the host fron-end is USB1.1,the picture occur poor quality and unstable

2)Image sensor: 1/4″ Sony HAD CCD

3)Lamp: 6 pcs white LED ,Excellent image managing software included. Including capture software for saving pictures on your computer. Picture can be enlarged or deleted as desired.

4)Freeze Button, light on/off button, there is Hand piece magnatic holder/bracket with automation power off function

5)Fifty disposable sleeves are provided to avoid cross contamination

6) Compatible with Windows XP SP2/Windows Vista/Windows 7(32 bit)

There are a lot range of cheap China dental intraoral camera for sale with best price at Dentalsalemall.com, feel free to take a look if you are interested in!

Dental scaling is a simple procedure for removing tartar deposits by using a dental scaler and other dental instruments. People with normal dental condition will not suffer any pain! However, if you have a hypersensitivity reaction (severe oral sensitivity), this procedure will be painful for you. But do not worry! Just talk to your dentist and he/she can use mild anesthesia so you can avoid the pain.

You may feel some sensitivity after the procedure, but this is temporary and may last for a few days. Your dentist may prescribe some medication for you or recommend you a toothbrush suitable for sensitive teeth.

Dental scaling is quick and important for your oral health, don’t think too much and just do it. In addition, by using a good toothbrush and the right technique to properly brush your teeth to maintain good oral hygiene after surgery is also very important. Good oral care is necessary to prevent tartar deposits and other dental problems.

Scaling Equipment: Woodpecker Dental Scaler

GUILIN WOODPECKER MEDICAL INSTRUMENT CO., LTD has been focused on researching, developing, and selling dental equipments for 25 years. It’s a world-leading level company in Dental industry.

 And the Woodpecker products have certified the FDA of USA, CE certification from TüV Rheinland Germany, EN ISO 13485:2012/AC2012 &ISO 9001:2008. Now the woodpecker dental scaler is widely used in dentistry and very popular among dentist.

Related products:

ultrasonic scaler with water bottle

woodpecker dte d7 scaler